Manitowoc Ice Ice Maker K00022 User Manual

K00022 ADAPTER KIT  
Installation Instructions  
1.  
2.  
The K00022 adapter kit is used for installing a B-0450, B-0600, B-0800, or B-1000 ice machine on a C-950 bin.  
The bin must be leveled before proceeding to step 2.  
Installation of adapter (see illustration):  
A.  
B.  
Remove foam tape from around bin.  
Remove existing ice deflector and install deflectors from kit using existing screws. The two deflectors  
should be installed end-to-end to make one continuous deflector.  
Apply foam tape to adapters and front and rear bin rail, as shown.  
Locate right-hand and left-hand adapter panels.  
C.  
D.  
E.  
F.  
Using the adapter panels as templates, drill four 5/32” diameter holes for each adapter in bin.  
Fasten panels in place with the screws provided in kit.  
3.  
Installation of ice machine:  
A.  
B.  
Position ice machine on bin.  
Proceed to ice machine installation instructions for electrical and water hook-up and start-up procedure.  
Manitowoc Ice, Inc.  
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA  
8001453  
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879  
Rev. 04/29/99  
 

Lasko Electric Heater 675945 User Manual
Learning Resources Table Top Game LER 5160 User Manual
Lenovo Laptop Flex 3 User Manual
Linear Network Router RE 1 User Manual
Logitech Headphones UE 4000 User Manual
Magellan Home Security System MG PMD75 User Manual
Makita Portable Generator G1700i User Manual
Martin Audio Speaker System Effect 5 User Manual
Maytag Microwave Oven MMC5000A User Manual
Melissa Vacuum Cleaner 640 108 User Manual